Keith Solomon
9a3a8f9368
- Implement ThermoproBLE class for handling BLE communication with ThermoPro BBQ thermometer. - Create ThermoproReading structure to hold thermometer data. - Develop Dashboard class for displaying thermometer readings and WiFi status on a TFT display. - Configure display settings and touch input handling. - Introduce SettingsManager for managing user settings stored in NVS. - Implement WiFiManager for handling WiFi connections and captive portal setup. - Add HTML interface for user to input WiFi credentials and ThermoPro MAC address. - Ensure proper state management for WiFi and BLE connections in the main application loop.
111 lines
4.5 KiB
Markdown
111 lines
4.5 KiB
Markdown
# CYD ThermoPro Bridge
|
||
|
||
Firmware for an ESP32 "Cheap Yellow Display" (ESP32-2432S028R) that reads temperature data from a ThermoPro BLE BBQ thermometer and exposes it through a local HTTP API.
|
||
|
||
## Hardware
|
||
|
||
- **Board:** ESP32-2432S028R
|
||
- 320×240 TFT (ILI9341 driver)
|
||
- Resistive touch panel (XPT2046)
|
||
- ESP32-WROOM-32 with 4 MB flash
|
||
- **Thermometer:** ThermoPro TP25 / TP25W / TP920 / TP930 / TP960
|
||
|
||
## Firmware architecture
|
||
|
||
```
|
||
┌─────────────────────────────────────────┐
|
||
│ CYD (ESP32-2432S028R) │
|
||
│ │
|
||
│ ┌─────────────┐ ┌──────────────┐ │
|
||
│ │ ThermoPro │ │ HTTP API │ │
|
||
│ │ BLE client │─────▶│ Web server │ │
|
||
│ └─────────────┘ └──────────────┘ │
|
||
│ │ │ │
|
||
│ ▼ ▼ │
|
||
│ ┌──────────────────────────────────┐ │
|
||
│ │ SettingsManager (NVS/Preferences)│ │
|
||
│ └──────────────────────────────────┘ │
|
||
│ │
|
||
│ ┌──────────────────────────────────┐ │
|
||
│ │ Touch UI: status + setup screens │ │
|
||
│ └──────────────────────────────────┘ │
|
||
└─────────────────────────────────────────┘
|
||
```
|
||
|
||
## API endpoints
|
||
|
||
- `GET /api/health` — device health and connectivity status.
|
||
- `GET /api/latest` — latest ThermoPro reading.
|
||
- `GET /api/settings` — current settings (excluding WiFi password).
|
||
- `POST /api/settings` — update settings (JSON body).
|
||
- `GET /` — setup page when in AP mode; status page when in STA mode.
|
||
|
||
## Endpoints response examples
|
||
|
||
### `GET /api/latest`
|
||
|
||
```json
|
||
{
|
||
"ok": true,
|
||
"deviceId": "cyd-smoker",
|
||
"device": "ThermoPro TP930",
|
||
"mac": "C9:48:1D:B1:E1:E7",
|
||
"connected": true,
|
||
"battery": 90,
|
||
"unit": "F",
|
||
"probeCount": 4,
|
||
"probes": [
|
||
{ "id": 1, "name": "Brisket", "temperature": 266.2, "connected": true },
|
||
{ "id": 2, "name": "Ambient", "temperature": 235.5, "connected": true },
|
||
{ "id": 3, "name": "Probe 3", "temperature": null, "connected": false },
|
||
{ "id": 4, "name": "Probe 4", "temperature": null, "connected": false }
|
||
],
|
||
"readingTime": "2026-07-19T12:00:00+00:00",
|
||
"bridgeTime": "2026-07-19T12:00:01+00:00"
|
||
}
|
||
```
|
||
|
||
## Setup workflow
|
||
|
||
1. **First boot:** the CYD starts a captive portal AP named `CYD-ThermoPro-Setup`.
|
||
2. Connect to the AP with a phone or laptop and open `http://192.168.4.1`.
|
||
3. Enter your home WiFi SSID and password, plus the ThermoPro MAC address.
|
||
4. The device connects to WiFi, stores the credentials, and reboots into normal mode.
|
||
|
||
Runtime settings (endpoint, token, probe names, units, polling interval) can be changed through the same web UI at the device's local IP or via the JSON API.
|
||
|
||
## Building and flashing
|
||
|
||
Requires [PlatformIO](https://platformio.org/) installed locally (not available in this cloud environment).
|
||
|
||
```bash
|
||
cd cyd-bridge
|
||
# Compile only
|
||
pio run
|
||
# Compile and upload to the CYD
|
||
pio run -t upload
|
||
# View serial output
|
||
pio device monitor
|
||
```
|
||
|
||
If you have not installed PlatformIO yet:
|
||
|
||
```bash
|
||
pip install platformio
|
||
```
|
||
|
||
## First-time hardware check
|
||
|
||
Before relying on the dashboard, verify the pinout matches your exact board revision:
|
||
|
||
1. Open `src/display/DisplayConfig.hpp`.
|
||
2. Confirm `TFT_CS`, `TFT_DC`, `TFT_RST`, `TFT_BL`, `TOUCH_CS`, and the SPI pins match the silkscreen or schematic of your ESP32-2432S028R.
|
||
3. If the screen stays white or touch is inverted, adjust `cfg.offset_rotation` in `DisplayConfig.hpp` or `setRotation()` in `Dashboard::begin()`.
|
||
|
||
## Development notes
|
||
|
||
- LovyanGFX driver/pin configuration lives in `src/display/DisplayConfig.hpp` and is tuned for the ESP32-2432S028R variant.
|
||
- BLE uses `NimBLE-Arduino` to leave enough RAM for the web server and UI.
|
||
- All user settings are stored in ESP32 NVS via `Preferences`.
|
||
- The firmware has not yet been compiled in this environment due to missing PlatformIO tooling; it should be built locally on your development machine before flashing.
|